The Cook and Housekeeper's Complete and Universal Dictionary; Including a System of Modern Cookery, in all Its Various Branches, Adapted to the Use of Private Families

has holes in it all the way up, like the outer surface of E.--In preparing for brewing, the machine is put together as in A, except placing on the lid. The first thing is to put the malt, coarsely ground, into E, and no part into F, or into the circular space between C and E; otherwise E cannot act as a strainer, when the liquor is drawn off; and in this consists its principal use. Having put in the malt, then add the water which of course flows into any part of the vessel C. Stir the malt well with a stick, or with something that will separate it completely, so that no adhesion may be formed by the flour of the malt. This is very apt to be the case in the common mode of brewing, when water is poured hot upon the malt; but here the water is applied in a cold state, so that there is little trouble in separating the malt completely in the water. If the small machine be used, which is adapted to a bushel of malt, and the beer is to be fully equal in strength to London porter, then eighteen gallons to the bushel may be considered as the general estimate; and for this purpose the first mash is to receive twelve gallons of cold soft water, which will produce nine gallons of wort. Having stirred the malt very carefully, light the fire under it, and get the liquor quickly to 170 or 180 degrees of heat. This may be ascertained by lifting off the lid, and dipping the thermometer from time to time into the centre F, and keeping it there a minute to give the quicksilver time to rise. While the mash is coming to this heat, stir the malt well three or four times. When the liquor has acquired its proper heat, put out the fire, and cover the whole of the machine with sacks, or something that will exclude the external air. In this state the mash remains for two hours: the cock is then turned, and